The problem lies in the fact that the repeater тупливает, and not one, but several, in different ways, at different times, in different place, on the screenshot shows that the repeater works, although to do this he must not, the power source is there. Such a phenomenon I have started with the picture 13w06a, previously, this was not respectively (picture 1), immediately arises because of this error with rails (unfortunately the picture show can not, because the time of day has changed, and the whole system works from the sensor sunlight), such a scheme (figure 2).
Linked issues
Attachments
Comments 10
Maybe the author kinda tries to say that repeater could forget to update itself to be off-state when powered off a weakened DLSensor at night? Going to test this. Hope he could explain himself in more proper english (or even proper russian I presume).
I'm from Russia and I am 14 years old, I use the Russian translation system yandex (yandex.ru), so sorry for the slow version. I will try to explain the other, something happens, it happens, with repeaters, and sometimes they are not turned off when power to them is just work, or even not switched on when the power was coming to them, and rails, which are included from the torches, which are turned on or off from repeaters do not work correctly, or just when the power does not work, or in case of power remain to work, I'm not saying that this happens every time, when submitting or disconnecting the power, but it happens, and I was not satisfied.
Russian version:
Попытаюсь объяснить по другому, что-то случается, бывает, с повторителями, и иногда они не отключаются, когда питание к ним не идёт и просто работают, или даже не включаются, когда питание к ним идёт, причём рельсы, которые включаются от факелов, которые включаются или выключаются от повторителей, работают не правельно, или так же при подаче энергии не работают, или при отключении энергии остаются работать, я не говорю, что такое происходит каждый раз, при подаче или отключения энергии, но такое случается, и меня это не устраивает.
By the way, looked at the screenshots, and I will say that the distance between each repeater to a maximum of 6 blocks (1 block after each repeater - to-earth, and the other five, leading to another Replicator from the block - red dust).
Russion version:
Кстати, посмотрел на скриншоты, и скажу, что расстояние между каждым повторителем как максимум 6 блоков (1 блок после каждого повторителя - земля, а другие пять, ведущие к другому повторителю от этого блока, - красная пыль).
If you have a very long redstone wire to control power over your very long railway then I guess this report most likely dupes [MC-711|MC-711] or [MC-3259|MC-3259] because it's what you are experiencing.
And please study english and stop using automatic translate engines for they are not designed to understand what you say and you are not fit to correct the outcomes of their magic over your input.
I don't understand.
The setup of your second screenshot works, see my screenshots.