铜傀儡的无限防腐bug？The infinite anti-corrosion bug of copper puppets?

1.在我刷铜傀儡披风的时候发现 貌似 在海上冰岛下面一层是沙子的情况下放置的铜傀儡 箱子在水里腐蚀了 但是铜傀儡却一点也没有腐蚀我等了现实5小时 一点没有改变形态的样子 还是全新 甚至带上陆地也没有腐蚀

于是我又在放置了一个铜块这次等氧化完全 造了一个氧化铜傀儡 等了一小时也没有变成雕像 他一直站在海平面箱子上 箱子在水里 箱子是完全腐蚀了 铜傀儡也是就是没变雕像

2 于是我又在雪原环境陆地做了一个铜块 等完全腐蚀 然后放置南瓜上去 过了5分钟铜傀儡就腐蚀成雕像 我不知道是不是我的问题 我查了很多视频 铜傀儡420~460腐蚀但我这样做却没有

3.注释 我出生点在雪原环境

1.When I was brushing the copper puppet cape, I found that the copper puppet box placed under the condition that the layer beneath the sea Iceland was sand had corroded in the water, but the copper puppet didn't corrode at all. I waited in reality for five hours and it didn't change its shape at all. It was still brand new. Even when I brought it onto land, it didn't corrode. So I placed another copper block this time, waiting for it to oxidize completely I made a copper oxide puppet and waited for an hour, but it didn't turn into a statue. It just stood on the box on the sea level. The box was in the water. The box was completely corroded, but the copper puppet didn't turn into a statue. So I made a copper block on the land in the snowfield environment and waited for it to be completely corroded. Then I placed a pumpkin on it. After five minutes, the copper puppet was corroded into a statue I don't know if it's my problem. I've looked up a lot of videos about the corrosion of copper puppets from 420 to 460, but when I did this, it didn't work. Note: I was born in a snowfield environment

谢谢阅读 我不知道这是不是bug 但是还是反馈一下吧 有可能是我的问题

Thank you for reading. I don't know if this is a bug, but please give me some feedback. It might be my problem

重现步骤1. 在仅为下至1格的水中放置铜块泡进水中 生成铜傀儡 他会一直在泡水的箱子上 然后无限打开箱子动作 无论等待多久你会发现 铜傀儡下的箱子会随着现实时间>游戏时间而氧化变绿 但铜傀儡却不会

2 .比对 在此方法变为 放置等待变绿再放置南瓜头壳变成的完全氧化铜傀儡 会一直持续存活开箱子状态 而不会变雕像， 带到陆地环境上也不会 ，它能够正常工作

观察结果. 对此 我放置了一个铜块，在陆地环境中等待完全变绿色 然后放置南瓜头壳复活它，却现实5分钟左右就变成雕像了

得到结论 它的出生地在仅为水平面 初始箱子在水。下面有一大圈方块的情况下 他会一直保持可能性的永久不腐蚀状态

Step 1: Place a copper block in water that is only 1 square lower and immerse it in the water to generate a copper puppet. It will remain on the water-soaked box and open the box infinitely. No matter how long you wait, you will find that the box under the copper puppet will oxidize and turn green as the real time exceeds the game time, but the copper puppet will not

2.In this method, if you place it and wait for it to turn green before placing the pumpkin head shell to form a complete copper oxide puppet, it will remain in the open box state and will not transform into a statue. Even when brought to the land environment, it will not change. It can still function normally

Observation result. For this, I placed a copper block, waited for it to turn completely green in a terrestrial environment, and then placed a pumpkin head shell to revive it. However, it turned into a statue in about five minutes

It is concluded that its birthplace is only at the horizontal level, and the initial box is in water. When there is a large circle of squares below, it will always maintain the possibility of permanent non-corrosion