Originally used a 1x1 elevator for a kelp farm but found my kelp was getting stuck, so expanded to a 2x3. Some kelp goes up but a lot gets stuck at the bottom, roughly 50/50.
Originally used a 1x1 elevator for a kelp farm but found my kelp was getting stuck, so expanded to a 2x3. Some kelp goes up but a lot gets stuck at the bottom, roughly 50/50.
Was able to confirm with elevator going straight up. If a shaft was set at the top heading sideways then there was no problem. Could not see bubbles through glass, however (as is possible from the screenshot provided in this report).